Midwest PC's

Custom PC Building Experts

Build Your Dream Machine

Professional custom computer builds for gaming, content creation, and work. Transparent pricing, quality parts, and full testing — delivered ready to go.

Start Your Build View Example Builds
150+ PCs Built
4.9★ Client Rating
2yr Build Warranty

What We Offer

From complete custom builds to upgrades and expert advice

🖥️

Custom Builds

Fully tailored PCs for gaming, streaming, video editing, 3D work, or office use. We select the best parts for your budget and goals.

  • Component selection
  • Cable management
  • Stress testing
  • OS installation
🔧

Upgrades & Repairs

Breath new life into your existing PC. GPU, CPU, RAM, storage upgrades, or full troubleshooting and cleaning.

  • Performance upgrades
  • Thermal paste & cleaning
  • Diagnostics
  • Part replacement
📋

Consultation & Parts Lists

Not ready for a full build? Get a professional parts list and guidance so you can build it yourself with confidence.

  • Budget optimization
  • Compatibility check
  • Future-proof advice
  • Shopping list
🚚

Delivery & Setup

Local delivery and on-site setup available. Remote setup guidance for customers further away.

  • Safe packaging
  • Local drop-off
  • Remote support
  • Aftercare

Featured Builds

Real configurations we recommend and build regularly

Best Value

Midwest Entry

1080p Gaming

From $1,100
  • Case Cooler Master Q300L V1 Micro-ATX
  • Motherboard ASUS Prime B550M-A WiFi II
  • CPU AMD Ryzen 5 5500
  • RAM Corsair Vengeance LPX 16GB DDR4
  • Storage Samsung 990 PRO 1TB
  • PSU Segotep 650W
  • GPU MSI GTX 1660 Super
Buy Now Request Quote
Most Popular

Midwest Performance

1440p Gaming

From $1,750
  • Case NZXT H5 Flow Mid-Tower
  • Motherboard ASUS ROG Strix B550-F Gaming WiFi II
  • CPU AMD Ryzen 7 5800XT
  • RAM Corsair Vengeance LPX 32GB DDR4
  • Storage Samsung 990 PRO 1TB
  • PSU Segotep GM850 850W
  • GPU Gigabyte RTX 3070 Ti
Buy Now Request Quote
Creator / High-End

Midwest Creator

4K Gaming + Content

From $4,000
  • Case HYTE Y70 Touch Infinite
  • Motherboard Gigabyte X870E AORUS PRO ICE
  • CPU AMD Ryzen 7 9800X3D
  • RAM KLEVV CRAS V RGB 64GB DDR5
  • Storage Samsung 9100 PRO 2TB
  • PSU Segotep GM850 850W
  • GPU ASUS Prime RTX 5070 12GB
Buy Now Request Quote

Prices shown are starting points and can be negotiated. Custom builds are strongly encouraged — tell us your goals and budget and we’ll put together the best configuration for you. Final quote includes current part pricing + build fee.

Content Creators: Reach out before your purchase for a deeper discount and potential sponsorship opportunities.

Buy Direct

Ready to order one of our standard builds? Purchase directly below — no quote needed.

Entry

Midwest Entry

1080p Gaming

$1,100
  • Ryzen 5 5500
  • GTX 1660 Super
  • 16GB DDR4
  • 1TB Samsung 990 PRO
  • Cooler Master Q300L
Buy Now — $1,100 Or request a custom version
Most Popular

Midwest Performance

1440p Gaming

$1,750
  • Ryzen 7 5800XT
  • RTX 3070 Ti
  • 32GB DDR4
  • 1TB Samsung 990 PRO
  • NZXT H5 Flow
Buy Now — $1,750 Or request a custom version
Creator

Midwest Creator

4K Gaming + Content

$4,000
  • Ryzen 7 9800X3D
  • RTX 5070 12GB
  • 64GB DDR5
  • 2TB Samsung 9100 PRO
  • HYTE Y70 Touch Infinite
Buy Now — $4,000 Or request a custom version
🔒 Secure checkout 💳 Cards · Apple Pay · Google Pay 📧 Instant confirmation

How direct purchase works:

  1. Click Buy Now on the build you want
  2. Pay securely on Stripe’s checkout page (cards, Apple Pay, Google Pay)
  3. You’ll get an email receipt immediately
  4. We’ll contact you within 24 hours to confirm shipping details and build timeline

Want different parts, a different budget, or a content-creator discount? Request a custom quote instead — pricing is negotiable and custom builds are encouraged.

✓ Payments are live

Buy Now buttons are connected to Stripe. Customers pay by card, Apple Pay, or Google Pay.

Confirmation emails: Stripe automatically emails the customer a receipt after payment. You also get a payment notification from Stripe.

How It Works

Simple, transparent process from idea to powered-on PC

01

Tell Us Your Goals

Budget, games you play, work apps, resolution, and any must-have parts. We listen first.

02

Get a Clear Quote

Detailed parts list with current prices, performance expectations, and total cost. No surprises.

03

We Build & Test

Careful assembly, cable management, BIOS setup, stress tests, and Windows optimization.

04

Deliver & Support

Ready-to-use PC with setup guide. Local delivery available. Ongoing support after delivery.

PC Building Guides

Free resources to help you understand the process (or do it yourself)

📖

First-Time Builder Checklist

Everything you need before you open the case: tools, anti-static tips, and common mistakes to avoid.

Read the guide →
🔌

Cable Management Basics

Clean builds look better and run cooler. Simple techniques that make a big difference.

Read the guide →

First-Time Builder Checklist

Everything you need to know and have on hand before you open the first box

Essential Tools

  • Phillips #2 screwdriver — Magnetic tip strongly recommended. This is the only screwdriver most builds need.
  • Anti-static wrist strap — Clip it to bare metal on the case. If you don’t have one, touch the metal case frequently while working.
  • Clean, well-lit workspace — Large table or desk. Avoid carpet (static risk). Good lighting prevents mistakes.
  • Small container or magnetic parts tray — Screws disappear easily. Keep them organized by type.
  • Motherboard manual (or PDF on your phone) — You’ll need the front-panel header diagram and standoff layout.

Very Helpful Extras

  • Velcro cable straps — Better than zip ties for first builds because they’re reusable.
  • Thermal paste — Only needed if your cooler does not come with pre-applied paste (most do).
  • Flashlight or phone light — Essential for seeing front-panel pins and tight corners.
  • Isopropyl alcohol 90%+ and microfiber cloth — For cleaning old thermal paste if reusing a cooler.
  • Plastic spudger or old credit card — Helps with stubborn cable connectors without damaging plastic clips.
  • Zip-lock bags — Label leftover screws and accessories so they’re not lost.

Things You Do NOT Need

  • Expensive multi-piece “PC builder tool kits” — a single good magnetic screwdriver is enough.
  • Extra thermal paste when the cooler already has it applied.
  • Full anti-static mat setups for a first build.
  • Power supply tester (plug the system in carefully after assembly instead).
  • Torque screwdrivers or specialty bits for standard consumer builds.

Recommended Build Order

  • 1. Install CPU → RAM → M.2 storage on the motherboard outside the case (easier access).
  • 2. Install I/O shield and standoffs in the case, then mount the motherboard.
  • 3. Install the CPU cooler.
  • 4. Mount the power supply.
  • 5. Install the GPU.
  • 6. Connect all power and data cables.
  • 7. Connect front-panel headers (power switch, LEDs, USB, audio).
  • 8. First power-on test before final cable tidy.

Pre-Build Safety Checklist

  • All parts are present and match what you ordered
  • Case standoffs match your motherboard size (ITX / mATX / ATX)
  • You’re working on a hard surface, not carpet
  • You’re grounded (wrist strap or touching metal case)
  • PSU is switched OFF and unplugged while assembling
  • No forced connections — if it doesn’t seat easily, stop and check orientation

Common First-Build Mistakes to Avoid

  • Forgetting the I/O shield before installing the motherboard.
  • Installing standoffs in the wrong holes (can short the board).
  • Not fully seating RAM (both clips should click).
  • Plugging CPU power into the wrong motherboard header.
  • Mixing up front-panel switch/LED pins (check the manual diagram).
  • Powering on with the side panel cables still pinched.

Pro Tip

Take clear photos at each major step. If the system doesn’t POST later, pictures of cable routing and header connections make troubleshooting dramatically easier. Never force a part — correct orientation almost always solves it.

Want a fully assembled, tested system instead?

Get a Custom Quote from MidwestPC

Budget Allocation Guide

Where to spend (and where to save) so your PC performs where it matters most

General Rule of Thumb

  • GPU (35–45%) — The single biggest impact on gaming and most creative workloads.
  • CPU (20–25%) — Important for productivity, streaming, and high-refresh gaming.
  • Motherboard + RAM (15–20%) — Don’t cheap out too hard; stability matters.
  • Storage (8–12%) — A fast 1TB NVMe is usually enough to start.
  • PSU + Case + Cooling (15–20%) — Reliable power and airflow protect the rest of your investment.

By Use Case

  • 1080p Gaming (budget) — Prioritize a solid mid-range GPU. A Ryzen 5 / i5 is plenty. 16GB RAM is the minimum, 32GB is better.
  • 1440p Gaming — GPU becomes the clear priority. Pair it with a strong 6–8 core CPU and 32GB RAM.
  • 4K / High-refresh + Content Creation — High-end GPU + strong CPU (X3D or high-core-count) + 32–64GB RAM. Storage speed and capacity also matter more.
  • Streaming / Productivity heavy — Shift more budget toward the CPU and RAM; GPU can be a step down from pure gaming builds.

Where Beginners Often Overspend

  • RGB everything (looks cool, rarely improves performance).
  • Ultra-premium cases when a good airflow case does the same job for less.
  • More RAM speed than you need (especially on older platforms).
  • Top-tier motherboards with features you’ll never use.

MidwestPC Tip

Tell us your target resolution, games, and budget. We’ll allocate the money where it actually improves your experience instead of padding the parts list.

Want a parts list built around your budget?

Request a Custom Quote

PC Budget Calculator

Enter your total budget and use case to see a recommended parts allocation

GPU $525
35%
CPU $300
20%
Motherboard + RAM $270
18%
Storage $150
10%
PSU + Case + Cooling $255
17%

These are starting guidelines. Real prices vary with market conditions and specific part choices. Request a custom quote for an exact parts list.

Cable Management Basics

Clean routing improves temperatures, noise, serviceability, and how the PC looks

Why Cable Management Matters

  • Airflow — Loose cables block intake and exhaust paths, raising GPU and CPU temperatures.
  • Noise — Higher temps mean fans spin faster. Clean routing often equals a quieter system.
  • Serviceability — Future upgrades or troubleshooting are much easier when cables are labeled and grouped.
  • Aesthetics — Behind a glass panel, messy cables are the first thing people notice.

Core Techniques

  • Use the rear cable channel — Almost every modern case has space behind the motherboard tray. Route excess length there.
  • Enter through the nearest grommet — Don’t stretch cables diagonally across the case. Short, direct paths look cleaner and reduce clutter.
  • Modular PSU advantage — Only install the cables you need (24-pin, CPU, GPU, SATA). Leave the rest in the box.
  • Velcro straps over permanent zip ties — Especially on a first build. You’ll move things around.
  • Group by function — CPU power together, GPU power together, SATA/data together, front-panel together.
  • Front-panel headers last — Power SW, Reset, LEDs, USB, and HD Audio are small and easy to reverse. Do them after the heavy cables are set.

PSU Cable Tips

  • 24-pin motherboard cable usually comes through a grommet near the right side of the board.
  • CPU (4/8-pin / 8+4) power typically routes through the top grommet.
  • GPU power cables should have gentle bends — avoid sharp folds right at the connector.
  • SATA power: daisy-chain drives where possible instead of running multiple long cables.
  • Hide extra length behind the tray or in the PSU shroud; don’t coil large loops in the main chamber.

Front Panel & Small Connectors

  • Check the motherboard manual for the exact JFP1 / front-panel pin layout.
  • Power Switch and Power LED are the most critical; Reset and HDD LED are optional on many builds.
  • USB 3.x headers only fit one way — don’t force them.
  • HD Audio connector is usually keyed; match the missing pin.

Common Mistakes

  • Draping thick GPU or PSU cables across fans or the GPU itself.
  • Pulling cables so tight that connectors are under constant strain.
  • Blocking front intake or rear exhaust with excess cable loops.
  • Leaving the rear of the case as a bird’s nest so the side panel won’t close cleanly.
  • Forgetting to plug in the CPU power cable (system may power on briefly then shut off).

Practical Workflow

1) Install major components. 2) Connect power and data with temporary routing. 3) Power on and confirm POST. 4) Only then do final cable tidy and Velcro. This avoids redoing work if a part is DOA. Every MidwestPC build includes full cable management and testing before delivery.

Prefer a clean, fully tested system delivered ready to go?

Get a Custom Quote

Why Build With Us?

  • No upselling We recommend what you actually need, not the most expensive parts.
  • Full transparency You see every part and price. Build fee is clear upfront.
  • Quality assembly Proper thermal paste, cable management, and thorough testing.
  • Aftercare 2-year build workmanship warranty + help with driver/Windows issues.

Ready to start?

Tell us what you need and get a free, no-obligation quote.

Get Free Quote

Get Your Custom Quote

Fill out the form and we’ll reply within 24 hours with recommendations and pricing.

Your message will be sent securely via Formspree. We’ll reply within 24 hours.

Other ways to reach us

📧
Email

sloppypvm@gmail.com

📍
Service Area

Local builds & delivery + shipping available

⏱️
Typical Turnaround

5–10 business days after parts arrive

💬
Response Time

Within 24 hours on quote requests